OFF 10% polyethylene anticorrosion cold applied inner layer tape

• Material:PE
• Use:MASKING
• Adhesive Side:Single Sided
• Adhesive:Rubber
• Adhesive Type:Pressure Sensitive
• Feature:Heat-Resistant
• Design Printing:No printing
• Place of Origin:CN;HEB
• Brand Name:liantu
• Model Number:liantup1081

OFF 10%  polyethylene anticorrosion cold applied inner layer tape

Features:

This product has been made by a special processing of butyl rubber to P.E. Its durability is strong and electric corrosion can be prevented. The pipe can be semi-permanently preserved which has an excellent effect on its corrosion resistance. It has a permanent and continuous adhesion effect, this outstanding combination of butyl rubber adhesion and P.E, make good weather resistance, outstanding electric and chemical characteristics and good workability for ease in both manual and machine work.

Usage:
1) Anti-corrosion of water pipe, gas pipe, oil pipe, etc
2) Anti-corrosion of electric wire, voltage and communication cable
3) Anti-corrosion of pipe in chemical factories having severe moisture and corrosion
4) Anti-corrosion of various pipe lines

Application temperature : -34°C ~ 71°C
Service temperature : -34°C ~ 85°C

Sub-material:
Primer: Primer increases tape adhesiveness.

How to use?
1)Pipe surface processing
Thoroughly clean the surface of the pipe by removing all foreign material.
Completely remove any sharp projections from the area of the weld.
Remove all rust and/or other impurities using a steel brush.

2) Apply primer
Before application, shake or mix primer thoroughly.
Because it is highly volatile, make sure it is securely sealed after use.
Because it contains inflammable solvents, use caution when working near any open flames.
To obtain best results, apply primer in a temperature range of 0°C~25°C and for storage a

temperature of -20°C~35°C is best.
Proper volume of primer is 100g per 1m².
When primer is applied and PE anti-corrosive tape is used, it is recommended to apply the

tape within a short time after the primer is completely dry.

Size:

thickness: 0.3mm-2.0mm

width: 10mm--300mm

length:10m-120m

OFF 10% polyethylene anticorrosion cold applied inner layer tape